Synthesis and characterization of perfluoro[1-(2-fluorosulfonyl)ethoxy]ethyl end-capped styrene oligomers

Styrene oligomers with perfluoro[1-(2-fluorosulfonyl)ethoxy]ethyl end-groups have been synthesized with moderate to high yields (52-97%) via radical oligomerization by using perfluoro[2-(2-fluorosulfonyl)ethoxy]propyonyl peroxide (PPP) at various reactant ratios of styrene over PPP (80, 160, 240, 300, 360 and 420) and different temperatures (33, 37 and 42 °C), and characterized by FTIR, ¹H NMR and ¹⁹F NMR. The molecular weight of the oligomers measured by gel permeation chromatography (GPC) is dependent on the reactant ratio and reaction temperature. The polydispersity of the oligomers varies from 1.99 to 3.30. The oligomer obtained at the reactant ratio of 300 has the maximum yield (97%) and much broader polydispersity (3.30). The contact angles of water, θ_H2O, on the oligomer films are much bigger than that of polystyrene (PS). The glass transition temperature of the oligomers, T_g, increases with the increase of molecular weight and is lower than that of the parent polymer.     

含有杂环基侧链的新型聚硅氧烷

含有功能性基团的聚硅氧烷的研究一直是有机硅化学中十分活跃的研究领域之一。当含N、S等杂环引入聚硅氧烷链中后，由于杂环基的生理活性、催化活性及光电特性，因而含不同杂环基团的聚硅氧烷（POS）可分别用作催化剂、光电材料、医学材料等。当用作药物载体时，可提高药物的利用率和靶向性，也可降低某些药物的毒性。含环糊精侧基、冠醚侧基的POS亦可应用于气相色谱固定相、相转移催化剂。本文对近年来有关侧链含有吡啶、咪唑等杂环及环糊精基团等功能性侧基的聚硅氧烷结构、合成、及应用作一详细的评述并进行了展望。     

Fluorescence ratiometric pH sensor prepared from covalently immobilized porphyrin and benzothioxanthene

A fluorescence ratiometric sensor for pH determination is described in this paper. The sensor incorporated the pH-sensitive dye meso-5,10,15,20-tetra-(4-allyloxyphenyl)porphyrin (TAPP) as an indicator and a pH-insensitive dye N-(2-methacryloxyethyl)benzo[k,l]thioxanthene-3,4-dicarboximide (MBTD), a benzothioxanthene derivative, as a reference for fluorescence ratiometric measurement. To prevent leakage of the dyes, both were photocopolymerized with acrylamide, hydroxyethyl methacrylate, and triethylene glycol dimethacrylate on the silanized glass surface. The reproducibility and response time of the prepared sensor were sufficient. Most common coexisting inorganic ions and organic compounds did not interfere with pH sensing. In the acidic pH range from 1.5 to 5.0 the fluorescence intensity ratio of the two dyes varied linearly as a function of pH. The sensing membrane was found to have a lifetime of at least one month. The sensor was applied to the analysis of waste water and artificial samples.     

由聚苯胺粒子组成的电流变液的研究

由经碱处理的掺杂态聚苯胺（ＰＡｎ）制得高介电常数的半导体ＰＡｎ粒子，将其悬浮于电绝缘油可组成电流变液，讨论了电流变（ＥＲ）液的静态屈服应力（τ＿ｓ），电流密度等性能与ＰＡｎ的介电常数（ε＿ｐ），导电率（σ），体积分数和应用电场强度的关系。对导电率相同的ＰＡｎ粒子，用氨水处理的ＰＡｎ粒子ε＿ｐ较用ＮａＯＨ液处理的高，前者在σ足够低如σ≤１．０×１０￣（－７）／ｃｍ时，ＥＲ液的τ＿ｓ随偶极系数的平方（β￣２）的增大而呈现非线性增加；后者ＥＲ液的τ＿ｓ随β￣２的增大出现一最大值．结果表明：由聚苯胺粒子可组成高电流变活性的无水ＥＲ液．     

Preparation and surface properties of latexes with fluorine enriched in the shell by silicon monomer crosslinking

A series of core-shell acrylic copolymer latexes containing fluorine enriched in the shell have been prepared by emulsion polymerization of a variety of hydrocarbon monomers with (perfluoroalkyl)methyl methacrylate and vinyltriethoxysilicone. In the presence of a reactive anionic and a long chain anionic-nonionic emulsifier, the core-shell latexes were prepared and characterized by transmission electron microscopy (TEM) and tapping-mode atomic force microscopy (AFM). From AFM and contact angle measurements, it was observed that the resulting fluorine and silicon-containing acrylic copolymers with surface energy as low as 15.5 mN/m formed a dense and gradient film containing a surface layer with high a fluorine content, and that the fluorinated particles can be fixed on the surface due to the crosslinking reaction of multi-functional silicon monomer even though the fluorinated carbon number was not enough to crystallize.     

A novel method of the separation/preconcentration and determination of trace molybdenum(VI) in water samples using microcrystalline triphenylmethane loaded with salicyl fluorone

It is the first time that triphenylmethane was used as an adsorbent to preconcentrate and separate trace amount of molybdenum in water samples. The effects of different parameters, such as acidity, stirring time and various metal ions, the amounts of triphenylmethane and salicyl fluorine, etc. on the enrichment yield of molybdenum have been studied to optimize the experimental conditions. Under the optimum conditions, molybdenum can be adsorbed on the surface of microcrystalline triphenylmethane loaded with salicyl fluorone by the intermolecular action strength. The possible reaction mechanism for the enrichment of molybdenum was discussed in detail in this paper. Mo(VI) can be completely separated from Pb(II), Co(II), Cu(II), Cr(III), Ni(II), Hg(II), Zn(II), Cd(II), Fe(III) and Al(III) in the solution. The proposed method was successfully applied to the determination of trace amount of molybdenum in various water samples by spectrophotometry after preconcentration using microcrystalline triphenylmethane. The preconcentration factor is from 83 (500 ml water sample was enriched to 6.0 ml) to 166 (1000 ml water sample was enriched to 6.0 ml). The detection limit is 1.3 × 10⁻⁵ mg l⁻¹ and the linearity is maintained in the concentration range 3.8 × 10⁻³ to 0.36 mg l⁻¹ with a correlation coefficient of 0.9998. The recoveries are in the range of 93.5-104%. The relative standard deviation is 1.8-2.9%. Analytical results obtained with this novel method are very satisfactory.     

配合物[Li(THF)_2]_2(μ—Cl)_4[(η~5—CH_3C_5H_4)Nd·THF]的合成及其晶体结构

环戊二烯基希土氯化物是一类合成希土有机配合物的重要前身。尽管在1980年前没能成功地合成含轻希土元素的这类配合物,但目前已发现,采用具有较大体积的取代环戊二烯做配体,如C_5Me_5H,C_5H_3〔Si(CH_3)_3〕_2H,C_5Me_4C_3H_7H和桥联的配体(C_5H_4)_2(CH_2)_3H_2都可得到相应的取代环戊二烯基轻希土氯化物。控制LnCl_3和CpNa的反应摩尔比也可以成功地得到这类轻希土的环戊二烯基氯化物。     

万古霉素手性固定相分离曼尼希碱类化合物对映体

采用大环抗生素类万古霉素手性固定相高效液相色谱法研究了一系列曼尼希碱类化合物的手性分离情况,并讨论了流动相中有机相的种类和比例、缓冲盐的种类和浓度、pH和柱温对该类化合物手性分离的影响。最佳实验条件为:乙腈:硝酸铵(35mmol/L,pH3.8)=15∶85(V/V),柱温15℃,流速0.6mL/min,检测波长300nm;四氢呋喃:硝酸铵(20mmol/L,pH4)=15∶85(V/V),柱温15℃,流速0.6mL/min,检测波长350nm。通过对比研究8种曼尼希碱类化合物的色谱行为,从结构上讨论了化合物中各种官能团对手性分离的影响,并探讨了手性分离的内在机制。     

Solvation of acylium fragment ions in electrospray ionization quadrupole ion trap and Fourier transform ion cyclotron resonance mass spectrometry

In electrospray ionization (ESI) quadrupole ion trap and Fourier transform ion cyclotron resonance mass spectrometry, certain fragment ions (e.g. acylium ions) generated either during the ion transportation process (in the source interface region) or in the ion trap are found to undergo ion--molecule reactions with ESI solvent molecules (water, acetonitrile and aliphatic alcohols) to form adduct species. These unexpected solvated fragment ions severely complicate the interpretation of mass spectrometic data. High-resolution accurate mass measurements are important in establishing the elemental compositions of these adduct species and preventing erroneous data interpretation.     

Linear response theory of ion excitation for Fourier transform mass spectrometry

A linear relation between the voltage density or magnitude spectrum of an excitation waveform and the corresponding ion orbital radius is derived for Fourier transform mass spectrometry (FTMS). This provides a theoretical foundation for the stored waveform inverse Fourier transform excitation method. The result is also useful for the design of optimal excitation signals as well as for the estimation of the kinetic energy of ions after an excitation event in collision-induced dissociation experiments. When the linear relation is applied to two-dimensional FTMS excitation, an analytical expression for ion speed modulation is obtained.